Things to Consider While Preparing for Industrial Paint and Coatings



Industrial paints are normally designed for use on ferrous and non-ferrous metal surfaces. Whether you are using these paints and coatings on iron, steel, or aluminum, they need to be modified in a way that they provide a better finish on that particular material. This calls for familiarization with whichever method you should use while painting a particular metal in order to get a good finish.

Steel is one of the easiest materials to paint. Despite the ease of painting, you won't get a smooth finish unless you use the most appropriate methods to eliminate grease, rust, and debris, which could cause the surface to be uneven. Use a hand power tool, solvent degreasing, or sandblasting to bring down the material to be painted to bare metal. Whichever method you choose to work with on the steel surface, ensure that it is capable of removing all the impurities, leaving a clean surface that is easy to paint.

When using industrial paints and coatings on different materials, you will find that aluminum is one of the hardest to paint. Practice extra care when removing paint or impurities from aluminum in order to get a smooth surface. Once the entire surface has been etched, you have to apply the paint carefully allowing some of it to flow into the fissures that were developed during the wash in order to give superior adhesion. The paint should be spread evenly throughout the surface in order to give your aluminum surface a smoother finish.  For more details about painting coating, visit http://www.ehow.com/info_12082131_difference-between-painting-coating.html .

Plastics and acrylics too can be painted using these industrial paints -simply note that they respond differently to these products. Solvents used in these kind of products tend to vary hence the huge difference. To stop damages from occurring, you need to use Ceramic Paint Coatings . Since some bright paints have pigments that have a poor hiding nature, the semi-transparent properties of certain acrylics are noticeable during painting. Use a very thick primer when painting such a metal to ensure that the surface is properly covered.

You have to begin with a test spot whenever you are painting a certain product or material using industrial paints. This spot needs to be prepared just like the entire material that is due to be painted. Using this spot, you will get to know which paints work best and those that do not. You will also know whether that industrial paint is good enough for what you need to achieve at the end. Know more about New Car Paint Protection .